Arkray Glucocard X-Meter - GLUCOCARD X-SENSOR Test Strips

9
GLUCOCARD™ X-SENSOR
These test strips need only 0.3 µL (microliter) of blood. Apply blood to the
sample application tip. The strip draws in the blood by capillary action.
The blood glucose reacts with the enzyme on the test strip. This produces
a current proportional to the blood glucose level. The meter detects the
current and converts it into a blood glucose reading.
Code No.
(F-2, 3 or 4)
Expiration date
F- 4
7
Test Strip Bottle
Front Back
Test Strip
Sample
Application Tip
(Apply blood
to end of test
strip. Capillary
draw will pull
blood to
reaction site).
Code No.
(F-2, 3 or 4)
Contact
Bars
Insert
this way
into
meter