Need help?Do you have a question about the Armfield FT74P and is the answer not in the manual?
Regulations for handling hazardous substances in the workplace.
Health hazards associated with water systems and microbial growth.
Explanation of ELCB/RCCB for electrical safety protection.
Procedures for unpacking and checking equipment upon delivery in the UK.
Procedures for unpacking and checking equipment upon delivery internationally.
Details on how the process components are assembled.
Description of the three-stage plate heat exchanger option.
Description of the dual concentric tube heat exchanger option.
Details on the cooling water flow rate control and connections.
Information on the optional data logging accessory and its connection.
Details on the optional homogeniser plate for the heat exchanger.
Procedure for swapping plate and tubular heat exchanger modules.
Information on different holding tube options and how to change them.
How to power the unit on and off via the main control panel.
Operating instructions for the feed pump speed and control.
Procedures for controlling the hot water circulator and heater.
How to set and adjust the process temperature using the controller.
Procedure for configuring the low temperature alarm settings.
How to correct for minor discrepancies in temperature readings.
Recommended controller parameter values and adjustments.
Step-by-step guide for disassembling and reassembling the plate heat exchanger.
Procedure for replacing temperature sensors in the product circuit.
Procedure for replacing the hot water circuit temperature sensor.
Guidance on cleaning the tubular heat exchanger without full disassembly.
Steps for replacing the stator on the progressive cavity pump.
Information on setting and changing inverter drive parameters for pumps.
Description of digital input signals for external control.
How to operate the unit remotely via computer or PLC.
Adherence to instructions, safe installation practices, and hazard awareness.
Safe commissioning, operation, and maintenance procedures.
Guidelines for safe use of electricity, RCDs, and water.
Measures to prevent fires, explosions, and safe handling of chemicals.
Requirements for eye, ear protection, and appropriate laboratory clothing.
Importance of guards, safety devices, and availability of first aid.
General| Category | Industrial Equipment |
|---|---|
| Model | FT74P |
| Manufacturer | Armfield |
| Type | Plate Heat Exchanger |
| Plate Material | Stainless Steel |
| Connections | 1/2 inch |
To Next Page
