950-0073-00 B SM, English, Arthrex Synergy UHD4 System 59 of 74
4.9 Final Check
Power cycle the CCU by holding down the power button for 3-5 seconds.
Complete this action five times to ensure that the Tablet Computer Data
Input Device successfully pairs with the CCU each time.
Select the “Export” button on the Tablet Computer Input Device. If a
USB stick is connected to the device, select the USB icon and verify the
LED above USB stick begins to blink.
4.10 Delete Test Case
Log into the Tablet Computer Data Input Device.
Select the Folder Icon as shown below:
Select the test case(s).
Select Delete.
Select “Yes” to confirm.
Ensure the case no longer appears in the Archived Cases list.
To Next Page
Loading...
Need help?
General