Synergy
RF™
System Service Guide
DFU-0276-4r0_fmt_en-US Page 34 of 50
10.0 Electromagnetic Emissions
Table 15 Guidance and Manufacturer’s Declaration – Electromagnetic Emissions
The AR-9800 Synergy
RF
system is intended for use in the electromagnetic environment specified
below. The customer or the user of the AR-9800 Synergy
RF
system should assure that it is used
in such an environment.
Electromagnetic environment – guidance
Group1
Class A
The AR-9800 Synergy
RF
system is suitable for use in all
establishments other than domestic and those directly
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
emissions
Class A
fluctuations/
flicker emissions
Complies
Table 16 System Cables
Power
Cords
Power to the
No No 3.048 m