Arturia KEYSTEP PRO - Launch Quantize; MIDI Settings

9.1.4. Launch Quantize
Launch
Quantize
Values Description
Project
[OFF, 1 bar (d),2
bars, 4 bars]
Set the moment the KeyStep Pro switches to another Project
after you select a new Project
Scene
[1 beat, 1 bar (d), 2
bars, 4 bars]
Set the moment the KeyStep Pro switches to another Scene
after you select a new Scene
Pattern
[OFF, at end (d), 1
bar]
Set the moment the KeyStep Pro switches to another Pattern
after you select a new Pattern
In this menu, you 'tell' the KeyStep Pro how it should continue to the next Pattern, Chain
or Scene. Should it wait for 1 bar, 2 bars or 4 bar to make the switch? This is useful in live
performance settings where you may not want to interrupt the flow of the music between
Projects.
If Sequencer and Drum Patterns are of unequal length, the KeyStep Pro will wait until the
end of the Drum Pattern before loading the next Project Scene or Pattern.
9.1.5. MIDI Settings
MIDI
settings
Values Description
Knob
acceleration
[Slow, Medium, Fast]
Sets the amount of acceleration applied to the
encoders.
Aftertouch
curve
[Linear, Exponential,
Logarithmic]
Sets the keyboard response curve for
Aftertouch
Velocity curve
[Linear, Exponential,
Logarithmic]
Sets the keyboard response curve for Velocity
Transport
send
[OFF, MMC, Realtime, Both]
Set whether the KeyStep Pro sends Transport
signals
Transport
receive
[OFF, MMC, Realtime, Both]
Set whether the KeyStep Pro receives
Transport signals
Clock send [OFF, ON] Enable/Disable clock send
Clock receive [OFF, ON] Enable/Disable clock receive
120 Arturia - User Manual Keystep Pro - KeyStep Pro Configuration