4.1.7. Master or Slave
KeyStep Pro can be the clock master for an entire MIDI rig, or it can just as happily serve
as a slave to several clock sources. Clock In and Clock Out can synchronize with older clock
types such as 2, 24 or 48 ppqn (pulses per quarter note), or even a single pulse per step.
Whether the KeyStep Pro will send or receive MIDI Clock signals and send or receive
Transport Signals (Start-Stop-Continue) will depend on the corresponding settings in
Utility>MIDI Settings.
♪: While the unit is playing a sequence, the Sync settings cannot be changed.
4.1.7.1. KeyStep Pro as Master
To use the KeyStep Pro as clock master, in Utility>MIDI Setting>Clock send must be on. This
is the default setting.
You can set the Master sync options in Utility>Sync>Output. To access the utility menu, hold
down SHIFT and press the Project button.
Category Parameter Description Utility MCC
*
Sync *
Output: 1 PP16, 2 PPQ8, 1 PPQ, 1PP2Q, 1
PPQ4Q, Korg, 24PPQ, 48PPQ
Allows KeyStep Pro to sync
with various clock types
x x
In this menu, you select how the KeyStep Pro will control the tempo of external modules or
synths.
• The transport section will control the internal sequencers.
• MIDI clock messages are sent to MIDI Out 1, MIDI Out 2, USB Out and Clock Out.
• The sequence tempo can be set using the Tempo encoder and the Tap Tempo/
Metronome button.
22 Arturia - User Manual Keystep Pro - KeyStep Pro Overview
To Next Page
Loading...
