4.1.7.2. KeyStep Pro as Slave
The KeyStep Pro can function as a slave to an external clock source. To use the KeyStep Pro
as a slave, in Utility>MIDI Setting>Clock receive must be on. This is the default setting.
You can set the Slave sync options in Utility>Sync>Input. To access the utility menu, hold
down SHIFT and press the Project button.
Category Parameter Description Utility MCC
*
Sync *
Input: Internal, USB, MIDI, 1 PP16, 2 PPQ,
24PPQ, 48PPQ, Auto
Defines tempo source of
KeyStep Pro
x x
In this menu, you select how the KeyStep Pro will follow the tempo of external modules or
synths.
When the KeyStep Pro is in Slave mode:
• The Tempo controls will not control the internal sequencer while the external
clock source is running.
• The KeyStep Pro transport section will perform as usual: you can stop, start and
pause the internal sequences, and you can record patterns.
• When the external clock source is not running, the KeyStep Pro will function
according to its internal clock at the last set tempo.
• The KeyStep Pro will pass the synchronization messages it receives from the
external clock source to USB Out, MIDI Out 1. MIDI Out 2 and Clock Out.
Arturia - User Manual Keystep Pro - KeyStep Pro Overview 23
To Next Page
Loading...
