For more in-depth information about the CV/Gate functions, refer to Chapter 10: Keystep Pro
and your modular system [p.138].
4.3.2. Drum Gates
The KeyStep Pro's Track 1 can be configured to work as an eight-output drum-trigger
sequencer by pressing the Drum button on the top panel. These are the individual gate
outputs for that sequencer.
This mode is described in detail in Chapter 5 [p.51] of this guide.
♪: These gate signals are not limited to triggering drum sounds. You can connect these outputs to
any input that accepts a trigger or gate signal, including an ADSR envelope generator or an LFO reset.
Experiment, and we're sure you'll find some delightful rhythmic uses!
Arturia - User Manual Keystep Pro - KeyStep Pro Overview 47
To Next Page
Loading...
