12
8.2 Connection
8.2.1 First time usage & BLE WiFi Setup
There is another way to setup Wifi if the above
method has failed:
1. Power up the device.
2. The LED light will start flashing quickly, wait till it flashes
slowly.
3. Make sure your mobile has connected to your home
network using 2.4G and your GPS and Bluetooth is on.
4. Open 4Stream APP and wait for device discovery. This
will take couple seconds.
5. 4Stream will ask to check the indicator, there should be a
slow flashing white LED light indicate it is waiting for WiFi
connection. Click on indicator is blinking. If is not white
LED, press the power button to change mode.
6. For Android device, the system will ask for permission
to use GPS data & File storage, please click accept to
continue. This GPS permission is setup by Google for BLE
usage, once setup is finish you can go to system settings
and disable it, file storage permission is to let 4Stream
access your mp3 files store in your mobile.
7. 4Stream APP will list out all the device available for
setup, choose the one you want.
8. 4Stream APP will then ask you to choose the network
you want the device to connect to, choose the one you
want to connect.
9. Now enter password for your network, if this is not the
network you want the device to connect, you can change it
to the desire one.
10. Then you can change the name of the device. You can
select a preset one or enter your own.
11. After you define the name of the device, you will see it
appears in the device list in 4Stream APP and now you can
start streaming music.
* If you change to another router, or the password of the
connected router has been changed, please quickly press the
mode button twice in WiFi mode to reset the WiFi connection.
1. Power up the device.
2. The LED light will start flashing quickly, wait till it
flashes slowly.
3. Goto your mobile WiFi settings and search for
SoundSystem_xxxx WiFi and connect.
4. Open 4Stream APP and you should see the
SoundSystem_xxxx list in the device list.
* Your mobile might ask if you want to stay using this WiFi
connection, click yes.
6. Click on the “+” icon on the top right corner to add
device. The app will prompt you to select the router
SSID you want your Up2stream device connect to (enter
password if required) and select continue.
7. Once connected, you can change the name of the
device. You can select a preset one or enter your own.
8. After you define the name of the device, you will see
it appears in the device list in 4stream app and now you
can start streaming music.
* Attention for Android users Different brand mobile
phones may ask you to allow to use SoundSystem WiFi
network, please choose yes, if not, you may not able to
set up successfully.
It may also ask you to authorize other things, please
choose yes or it may affect your use.
To Next Page
Loading...
