Page 2-2
Installation
Before You Start
Before you begin the installation, check the AC voltage of the your country
area. The AC power adapter used with your Asanté 10T Hubs or BNC Hubs
should have the AC voltage that matches that of your country.
▲
Using an AC power adapter with an incorrect AC voltage
may damage your hub.
Table 2-1 Power Adapter Specifications
Figure 2-1 AC Power Adapter
Be sure to check AC power voltage before starting the installation.
Input Power The AC power voltage of
your country power
electricity specification
Output power 12VAC @ 1.25 Ampere
10T Hub Ch 2 Page 2 Thursday, August 22, 1996 4:25 PM
To Next Page
Loading...
Need help?
General
