Asante 10T Hub/8 User Manual

Page C-2
IEEE 802.3 Compliance
❏
10BaseT (twisted-pair, UTP)
❏ 10Base2 (thin, BNC)
❏ 10Base5 (thick, AUI)
10T Hub/8
❏
Eight 10BaseT, UTP ports. Port #1 may work as an IN or
an OUT port; all other 10BaseT ports are IN ports. Only
RJ45 connectors are provided.
❏ One “either/or” BNC/AUI port. Only one of the connec-
tors may be used at one time; autosense circuit detects
which connector is in use.
10T Hub/12
❏
Twelve 10BaseT, UTP ports. Port #1 may work as an IN
or an OUT port; all other 10BaseT ports are IN ports.
Both RJ45 connectors and one RJ21 connector are pro-
vided. Either the RJ45 connectors or the RJ21 connector
may be used at one time.
∆ You cannot use both the RJ45 and RJ21 connectors sim-
ulataneously.
❏ One BNC and one AUI port. Both may be used at the
same time.
10T Hub/24
❏
Twenty-four 10BaseT, UTP ports. Port #1 may work as an
IN or an OUT port; all other 10BaseT ports are IN ports.
Only RJ45 connectors are provided.
❏ One AUI port.

Asante 10T Hub/8 Specifications

General

Brand	Asante
Model	10T Hub/8
Category	Switch
Language	English