Asante MacCon Family Ethernet Network Cards for the Macintosh User Manual

iii
List of Figures
Figure 2-1 Selecting AUI, MacCon NuBus card 2-3
Figure 2-2 Disabling Link Integrity, MacCon-i NuBus card 2-4
Figure 2-3 Installing a MacCon 3 NuBus card 2-5
Figure 2-4 Installing MacCon NuBus card, Apple Centris 610 2-6
Figure 2-5 Selecting the AUI port, MacCon 610 card 2-7
Figure 2-6 Disabling link integrity, MacCon 610 card 2-7
Figure 2-7 The MacCon 610 card plugged into the expansion slot on the
motherboard 2-8
Figure 2-8 Disabling link integrity, LCIII card 2-9
Figure 2-9 The MacCon LC card plugged into the expansion slot on the
motherboard 2-10
Figure 2-10 The rear panel removed on the Color Classic 2-11
Figure 2-11 Installing the MacCon LC in the expansion slot in the Color
Classic 2-12
Figure 2-12 The MacCon3 IIsi controller card and daughter card installed
in a Macintosh IIsi 2-15
Figure 2-13 Removing the MacCon3 IIsi daughter card 2-17
Figure 2-14 Installing a MacCon3 IIsi card with a Radius card 2-17
Figure 2-15 Installing a MacCon+ 30i card in a Macintosh SE/30 2-19
Figure 2-16 Installing the MacCon SE daughter controller card and
daughter card 2-22
Figure 2-17 The Easy Install dialog box 2-27
Figure 2-18 Network control panel 2-28
Figure 2-19 An example of a user’s Chooser dialog box 2-29
Figure A-1 Location of Ethernet addresses on MacCon cards A-2

Asante MacCon Family Ethernet Network Cards for the Macintosh Specifications

General

Brand	Asante
Model	MacCon Family Ethernet Network Cards for the Macintosh
Category	Network Card
Language	English