DBT12/15/24 Operations Manual....30
6.4. AUTO RESTART FEATURE
The Auto-Restart feature safely and automatically brings the unit back on-line following a shore
power failure and recovery event. Highlights include:
Automatically routes power from the dock to the ship’s power bus.
Fault tolerant to guarantee safe operation.
Valid shore power verified prior to restart.
Handles repeated power failures without operator intervention.
LETHAL VOLTAGES ARE AUTOMATICALLY ROUTED WITHIN THE
UNIT WHEN (1) SHORE POWER IS PRESENT, AND (2) THE CIRCUIT
BREAKER IS IN THE “ON” POSITION.
LETHAL VOLTAGES WILL BE AUTOMATICALLY ROUTED TO THE
UNIT OUTPUT AND THE SHIP POWER CONTACTOR WILL
AUTOMATICALLY CLOSE WHEN (1) SHORE POWER IS PRESENT, AND
(2) THE CIRCUIT BREAKER IS IN THE “ON” POSITION.
NEVER REMOVE ANY PANELS OR COVERS WITHOUT SECURING
(REMOVING) SHORE POWER.
NEVER PERFORM MAINTENANCE OR SERVICE WITHOUT SECURING
(REMOVING) SHORE POWER.
To Next Page
Loading...