89
address such as "192.168.122.1"; (b) enter IP addresses within one subnet or
within the same IP pool such as "192.168.123.*" or "192.168.*.*"; or (c) enter all
IP addresses as "*.*.*.*".
6. Port Range: For source or destination port range, you can either: a) enter a
specific port, such as "95"; or b) enter ports within a range such as "103:315",
">100", or "<65535".
7. Destination IP: For source or destination IP address, you can: (a) enter a specific
IP address such as "192.168.122.1"; (b) enter IP addresses within one subnet or
within the same IP pool such as "192.168.123.*" or "192.168.*.*"; or (c) enter all
IP addresses as "*.*.*.*".
8. Port Range: For source or destination port range, you can either: a) enter a
specific port, such as "95"; or b) enter ports within a range, such as "103:315",
">100", or "<65535".
9. Protocol: The protocol of service used to transport the packages. (UDP, TCP)
10. Add/Delete: Click or to add/delete the profile.
11. When done, click Apply.
To Next Page
Loading...
