ASPION G-Log Premium / Program installation for additional users
User manual – Version 3.2/11-19 Copyright © ASPION GmbH Page 52
4. Program installation for additional users
When installing the ASPION G-Log Manager for additional users, a distinction is made between computers
with direct access to the company network and remote computers which cannot directly access data in the
network.
4.1 PCs with network access
Please follow the following steps to install the program for additional users with shared access in the
network:
Install the ASPION G-Log Manager locally on the computer, see ASPION G-Log Manager – PC software,
chapter 2, "Installation". Start the "G-LogConfig.exe“ configuration program via the context menu (right
click), "Run as administrator":
The "G-LogConfig.exe“ configuration program is stored in
the same directory as the ASPION G-Log Manager.
Example: C:\Program Files (x86)\ASPION.
The following mask opens:
Select "General".
As data folder, enter the network directory in which you save all program data. This must be the same data
folder which you have entered in the master program installation.
Close the installation by clicking the Use settings button. When starting the ASPION G-Log Manager
Premium version, the settings you have defined in the configuration program are applied and are visible to
the users.
The installation of the program on the users' computer is finished. Repeat the installation steps for setting
up the program on other computers within the network for additional users.
4.2 Remote PCs without network access
Installing the software for users without network access follows the steps of the standard installation, see
ASPION G-Log Manager – PC software, chapter 2.2, "Installation". Select a local directory to store the
program data.
To Next Page
Loading...
Need help?
General
