ASPION G-Log Manager – PC software / Data analysis
User manual – Version 3.2/11-19 Copyright © ASPION GmbH Page 38
You can select different views for temperature events: all values or only values above the upper
threshold value or only values below the lower threshold value.
Zoom function: To receive more details about a period, press and hold the left mouse button to select a
period that is displayed in the upper content area. Double-click on the left mouse button in this area to
return to the general overview. The gray shading marks the selected period. The start time of the
recording is marked by a gray triangle, the end (Stop) of the recording – if available – is marked
accordingly at the end of the timeline.
10.6 Climate events with ASPION G-Log 2
You have many analysis options for climate recording with ASPION G-Log 2. In the following, the analysis is
described in general and various configurations and their application are explained in further examples (We
make no claim to completeness).
Select the Data analysis function in the left area. Select the desired analysis from the list area to the
right. Click on the Climate tab.
The content area includes the following information:
Display area of the climate events represented in a course. If threshold values are set, these are
displayed as lines. The left axis shows temperature values, the right axis shows relative humidity values
in %.
Temperature:
The permitted temperature range is marked by a red and blue line. The temperature curve is displayed
in gray. Values above the permitted range are marked red, values below the permitted range are
marked blue.
To Next Page
Loading...
Need help?
General
