ASPION G-Log Premium / Automatic transfer of analyses
User manual – Version 3.2/11-19 Copyright © ASPION GmbH Page 55
8. Automatic transfer of analyses
Users of the Smartphone App as well as users of the ASPION G-Log Manager on a remote computer benefit
from the automatic transfer of data without further action. As soon as an Internet connection is available,
the analyzed data is automatically transferred to the Cloud. The user can control this quickly and easily. The
following symbols are used in the displays:
Waiting for Cloud upload Cloud upload successfully executed
8.1 With the Smartphone App
The application of the Smartphone App is identical to the Standard version, see ASPION G-Log App for
Smartphones. But App users benefit from the automatic transfer of data analyses which do not have to be
sent by e-mail. This only requires that the App is activated as long as the data is transferred. If no mobile
connection is available, you can restart the App later. If a mobile connection exists, call the Readout data
function and wait until the data transfer is finished, indicated by this symbol:
Tip: you can download a short description about the ASPION G-Log Premium App for your customers in our
ASPION customer portal on our website. You can complete the template with your individual data.
Preview of the short description for your customers, available in the ASPION customer portal.
Short descriptions: ASPION G-Log ASPION G-Log 2
8.2 With a remote computer
Reading out the sensors follows the same steps as with the Standard version, see ASPION G-Log Manager –
PC software, chapter 8, "Reading the sensor". But App users benefit from the automatic transfer of data
analyses to the Cloud if an Internet connection is established. To check whether the transfer has been
successful, switch to the Data analysis function.
To Next Page
Loading...
Need help?
General
