Aspion G-Log Series User Manual

ASPION G-Log shock sensors / Technical specifications
User manual – Version 3.2/11-19 Copyright © ASPION GmbH Page 8
3.2 ASPION G-Log 2
Description
Details
Accelerometer
3 axes: x, y and z
up to ±24 g per axis
Measuring frequency
 Up to ±16 g calibratet, 2.5% accuracy,
extendable up to ±24 g approx. 3.5%
accuracy, verified by a testing facility
 0,2 g resolution
 Adjustable threshold from 2 g to 12 g
 Between 25 Hz and 400 Hz
Temperature sensor
Calibrated by manufacturer
 -40°C ... +85°C with accuracy of ± 2°C
 0.1°C resolution
 Lower and upper threshold freely definable
Humidity sensor
Calibrated by manufacturer
 0% rH … 100% rH, non-condensing
 3% rH accuracy; 0.1% rH resolution
 Definable threshold
Memory/logging
Non-volatile memory
Event and interval triggered
with thresholds
 Capacity: 950 events in circular buffers
 Saves first and 8 highest peak events with
details permanently
Data transfer and
analysis
Wireless via NFC with
PC software and App
 Data is transferred by NFC
 Configuration and analysis with PC software
and NFC-enabled reading devices
Near Field
Communication (NFC)
NFC Tag (Type 4)
 ISO/IEC 14443B compatible
 13.56 MHz RF interface
BLE for data transfer
Bluetooth Low Energy to read
out data via the App
 Max. 10m range in line of sight
 Min. Bluetooth 4.0 specification
 Can be deactivated for air transport
 Bluetooth Declaration ID: D047584
Battery
CR2032 3V Lithium 225 mAh
battery exchangeable,
manufacturer Panasonic
recommended
 Battery life depends on data rate; up to 1.5
years;
 Battery power level at delivery: full
 Battery consumption when not active: 5%
per year for indicated storage conditions
 No declaration for air transports
Operating conditions
Temperature range
Storage
Humidity range
 -30°C ... +60°C
 5°C … +40°C, humidity: max. 85%
 0% rH … 100% rH, non-condensing
Housing and mounting
ABS housing; Screw mounting
M3 ISO 7380 FL; optional:
fixing with industrial adhesive
tape
 Dimensions: 88 mm x 45 mm x 16 mm
 Distance of mounting holes: 80 mm
 Maximum tightening torque: 0.4 - 0.5 Nm
Version
IP 50 protection
 Protection through membrane
 Weight: approx. 35 g
 Penetration of fluids is to be prevented
(Corrosion damage/short circuit)

Aspion G-Log Series Specifications

General

Brand	Aspion
Model	G-Log Series
Category	Accessories
Language	English