ASPION G-Log shock sensors / Technical specifications
User manual – Version 3.2/11-19 Copyright © ASPION GmbH Page 7
3. Technical specifications
3.1 ASPION G-Log and ASPION G-Log Waterproof
3 axes: x, y and z
up to ±24 g per axis
Measuring frequency
Up to ±16 g calibratet, 2.5% accuracy,
extendable up to ±24 g approx. 3.5%
accuracy, verified by a testing facility
0,2 g resolution
Adjustable threshold from 2 g to 12 g
Between 25 Hz and 400 Hz
Calibrated internally,
by manufacturer
-30°C ... +60°C with accuracy of ± 2°C
1°C resolution
Lower and upper threshold freely definable
Non-volatile memory
Event triggered
Capacity: 286 events in circular buffers
Saves first and 8 highest peak events with
details permanently
Data transfer and
analysis
Wireless via NFC with
PC software and App
Data is transferred to sensor via NFC
Configuration and analysis with PC software
and NFC-enabled reading devices
Near Field
Communication (NFC)
ISO/IEC 14443B compatible
13.56 MHz RF interface
CR2032 3V Lithium 225 mAh
replaceable by manufacturer
(does not apply to
Waterproof version)
Battery life depends on data rate; up to 1.5
years; e.g. 1 year for 100 Hz
Battery power level at delivery: full
Battery consumption when not active: 5%
per year for indicated storage conditions
No declaration for air transports
Temperature range
Storage
-30°C ... +60°C
5°C … +40°C
humidity: max. 85%
ABS housing; Screw mounting
M3 ISO 7380 FL; optional:
industrial adhesive tape
Dimensions: 88 mm x 45 mm x 16 mm
Distance of mounting holes: 80 mm
Maximum tightening torque: 0.4 - 0.5 Nm
Standard, IP 50 protection
Waterproof, IP 65/67
protection
Weight: approx. 35 g
Penetration of fluids is to be prevented
(Corrosion damage/short circuit)
Weight: approx. 50 g, dustproof and
waterproof
EC - Declaration of
Conformity
RED Directive 2014/53/EU
ROHS Directive 2011/65/EU and WEEE