44 45
English
2.9 Identication purpose LED/Switch
With the UID button, locate the server working on from behind a rack of servers.
Unit Identication
purpose LED/Switch
(UID1)
When the UID button on the
front or rear panel is pressed,
the front/rear UID blue LED
indicator will be truned on.
Press the UID button again to
turn o the indicator.
1. Press and hold the UID button for 4 seconds, the BMC will trigger an external reset.
2. Press and hold the UID button for 10 seconds, the BMC will reset and load default values.
To Next Page
Loading...
