ASROCK GENOAD12M3-2Q - BMC Network Configuration

GENOAD12M3-2Q
GENOAD12M3-2Q/H
GENOAD12M3/T
82 83
English
When [DHCP] or [Static] is selected, do NOT modify the BMC network settings on the
IPMI web page.
3.5.1 BMC Network Conguration
Bonding Setting
Use this item to enable or disable bonding, Set this item to enable bonding please enable all
Lan channel rst.
Bond0 Enable Setting
Show the Bond0 status is enabled or disabled.
Manual Setting IPMI LAN
If [No] is selected, the IP address is assigned by DHCP. If using a static IP address, toggle
to [Yes], and the changes take eect aer the system reboots. e default value is [No].
Conguration Address Source
Select to congure BMC network parameters statically or dynamically(by BIOS or BMC).
Conguration options: [Static] and [DHCP].
Static: Manually enter the IP Address, Subnet Mask and Gateway Address in the BIOS for
BMC LAN channel conguration.
DHCP: IP address, Subnet Mask and Gateway Address are automatically assigned by the
network's DHCP server.