ASROCK GENOAD12M3-2Q - BMC Tools

88 89
English
3.5.4 BMC Tools
KCS control
Select the KCS interface state after POST end. If [Enabled] is selected, the BMC will
remain KCS interface aer POST stage. If [Disabled] is selected, the BMC will disable KCS
interface aer POST stage.
Restore AC Power Loss
is allows user to set the power state aer an unexpected AC/power loss. If [Power O]
is selected, the AC/power remains o when the power recovers. If [Power On] is selected,
the AC/power resumes and the system starts to boot up when the power recovers. If [Last
State] is selected, it will recover to the state before AC/power loss.
Load BMC Default Settings
Use this item to load BMC default settings.