40
EN
The escape door control terminal 1338
General
The escape door control terminal 1338 (Fig. 1) is designed to control and monitor a
single escape door. It contains all the electronic control devices so that no
additional control unit is required. All relevant operating and control elements
are integrated in the control terminal and therefore do not need to be additional-
ly connected externally.
Product models
Model 1338-20
In addition to the entire control electronics, the escape door control terminal
1338-20 has an integrated mains adapter, which supplies both the electronics of
the control terminal and the locking elements with the necessary voltage. The
control terminals can be operated as stand-alone devices or as bus devices.
Model 1338-14
The escape door control terminal 1338-14 is intended for stand-alone operation. It
has the same functionality as the 1338-20 but without bus support.
Fig. 1 :
Escape door
control terminal
1338 –
open rear side on
right
12345
F2
LN
F1
N
O
T
A
U
F
The escape door control terminal 1338
To Next Page
Loading...
