60
EN
Maintenance and inspection
Maintenance
Escape door control terminals do not require any maintenance. If faults which are
not caused by faulty installation or fitting occur during operation or during one of
the compulsory tests, the device in question should be taken out of service
immediately and sent to the manufacturer to be checked.
Note!
The fact devices do not require maintenance does not release building operators
from the obligation to subject escape door locking systems to inspection on a
regular basis.
Recurring inspection
A technical specialist must:
· carry out an annual inspection of escape route doors with electric locking
systems.
· issue a recurring inspection certificate, which the building operator must sub-
mit to the building inspection authorities if required.
Certification
C M
ASSA ABLOY
Sicherheitstechnik GmbH
Bildstockstraße 20
72458 Albstadt
GERMANY
Sicherheitstechnik GmbH
Werk Albstadt
EltVTR
The EU declaration of conformity is available in the download area of
assaabloyopeningsolutions.de
I
Maintenance and inspection
To Next Page
Loading...
