Assa Abloy Orion User Manual

33
ASSA ABLOY Hospitality
66 8003 015-3
To add/modify a thermostat:
1. Double click on Thermostats
under the Lists tab in the
navigation window.
2. Click Add to add a new thermostat,
or Properties to modify an
existing thermostat.
3. At Door, enter the number of the
guest room where the thermostat
is located. If the same thermostat
properties should be valid for
thermostats in several rooms, add
all concerned room numbers (e.g.
101-103). If the concerned rooms
are not in sequence, separate them
with commas (e.g. 101-103, 105,
108-109).
4. At Profile, choose the applicable
thermostat profile in the
combobox. If no applicable
profile is available, click the
button to create a new one.
5. Click Save and Close, or New if
the Door field should be emptied
and a new thermostat be added.
Figure 22
To check the status of a thermostat:
1. Double click on Thermostats
under the Lists tab in the
navigation window.
2. Mark the applicable thermostat
and click Status.
Figure 23

Assa Abloy Orion Specifications

General

Brand	Assa Abloy
Model	Orion
Category	Thermostat
Language	English