Assa Abloy Sargent IN100 - Lock Adjustments

07/31/16
1-800-810-WIRE • www.sargentlock.com • A8189B 9
Copyright © 2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
IN100 Cylindrical Lock
The lock is shipped “preset” and does not require adjustment for 1-3/4” thick doors.
5 Lock Adjustments
NOTE: Adjusting for a thicker door requires removal of the outside lever, scalp and spacer bushing;
see the following sections.
If preset lock does not require adjustment, proceed to Section 7 - Install Lock.
A. Lock Preset:
• Lockbody holes: 12 and 6 o’clock (Fig. 5).
Outside of Door
Fig. 5
Door thickness:
1-3/4” thick
Preset Lock