Associated Research SC6540 User Manual

57
configuration will be H (High), L (Low) or O (Open). For example, the syntax for
this command for 1 main with 8 GND channels and 8 HV channels would be
GNDHV 3, HLOOOOL.
5.7.3. Query Commands
These query commands will retrieve data from the instrument. The GPIB bus
application requires an IEEE-488 read command to be sent after the query
command. These commands include functions for retrieving test data, test results
and remote hardware status as well as setup file information.

Associated Research SC6540 Specifications

General

Brand	Associated Research
Model	SC6540
Category	Multiplexer
Language	English