Astoria 2GR - Page 42

TECHNICIANS' manual
44 of 108
6.14.2 Programming the Clock
This menu is used to change the time, date and day of the
week:
• Enter the programming mode and scroll through the menu
until the following is shown on the display:
CLOCK SETUP
09:16 18-10-12 1
• Changetheashingparameterviathe(+) and (-) buttons.
• Press the (ENTER) button to move on to the next param-
eter.
• To conrm the enteredparametersand moveon to the
next programming function, press the (MODE) button.
6.14.3 Programming the machine’s
Switch-On and Switch-Off function
This menu is used to programme the machine’s automatic
switch-on and switch-off procedures.
Toenablethisfunction,theswitch-ontimemustrstbeset,
before setting the switch-off time.
• Enter the programming mode and scroll through the menu
until the following is shown on the display:
AUTO ON/OFF
ON 08:00
• Press the (ENTER) button to enter the menu.
• Set the machine’s switch-on hour via the (+) and (-) but-
tons and then press (ENTER).
• Set the minutes of the machine’s switch-on time via the
(+) and (-) buttons and then press (ENTER).
• The machine start-up settings are saved; you can then
proceed to set the switch-off time when the following ap-
pears on the display:
AUTO ON/OFF
OFF 23:00
• Set the machine’s switch-off hour via the (+) and (-) but-
tons and then press (ENTER).
• Set the minutes of the machine’s switch-off time via the
(+) and (-) buttons and then press (ENTER).
• To conrm the enteredparametersand moveon to the
next programming function, press the (MODE) button.
To disable the "AUTO ON/OFF" function, set the
time to 00:00.
6.14.4 Programming a Working Day
This menu is used to programme the machine’s switch-off
function for non-operating days.
To set the machine’s shutdown days, follow the instructions
below.
• Enter the programming mode and scroll through the menu
until the following is shown on the display:
WORKING DAYS
1234567
• At this moment, the machine is active seven days a week
becauseallthenumbers(whichdenetherelativedays)
are visible.
Days of the week table
1 Monday 5 Friday
2 Tuesday 6 Saturday
3 Wednesday 7 Sunday
4 Thursday
• Toswitchoffthemachineonaspecicday,selectthede-
sired day via the (+) and (-) buttons.
• Press the (ENTER) button to deactivate the desired work-
ing day.
• Then, and only is desired, select another working day and
press the (ENTER) button to deactivate it.
WORKING DAYS
1-3-567
An example of when the machine has been programmed to
be switched off on Tuesdays and Thursdays.
On the days of the week in which the machine
will be switched off, the “-“ symbol appears in-
stead of the relative number.
If you want to reactivate the machine on the previously-deac-
tivated days, proceed as follows:
• Select the deactivated day via the (+) and (-) buttons
(where the “-” symbol appears).
• Press the (ENTER) button to activate the desired day (the
day number will now appear).
WORKING DAYS
1234567
Example of the machine with no non-operating days.
Once the programming is complete, press the (MODE) button
toconrmtheenteredparametersandmoveontothenext
programming function.