Asus P5M2 - Initializing the Logical Drives

ASUS P5M2 Series
5-17
5.2.4 Initializing the logical drives
After creating the RAID set(s), you must initialize the logical drives. You may initialize
the logical drives of a RAID set(s) using the Initialize or Objects command on the
Management Menu.
Us ing th e I nit ial ize co mma nd
To initialize the logical drive using the Initialize command:
1. From the
Management Menu, highlight Initialize, then press <Enter>.
2. The screen displays the available RAID set(s) and prompts you to select the
logical drive to initialize. Press the <Spacebar> to select the logical drive from
the Logical Drive selection, then press <F10>.