Asus P5M2 - Deleting an Array; Viewing Sas Topology

5-46
Chapter 5: RAID configuration
• You cannot recover lost data if you delete an array. Make sure you
back up important data before deleting an array.
• If you delete an IM (RAID 1) volume, the data is preserved on the
primary disk.
To delete an array
1. From the Manage Array screen, select Delete Array, then press <Enter>.
De let ing an ar ray
2. Press <Y> to activate, or <N> to cancel.
Vie win g S AS top olo gy
1. From the Adapter Properties screen, select SAS Topology.
Esc=ExitMenuF1/Shift+1=Help
Enter = Select Item
LS I  Lo gi c  Co nf i g U ti l it y             v 6 . 0 8 . 0 5 . 0 0  (2 0 0 6 . 0 8 . 0 2 )
Manage Array -- SAS1068
Identier  LSILOGICLogicalVolume3000
Type IME
Scan Order 0
Size(MB)  51498
Status Optimal
Manage Hot Spare
Synchronize Array
Activate Array
Delete Array
Esc=ExitMenuF1/Shift+1=Help
Enter = Select Item -/+ = Change Item
LS I  Lo gi c  Co nf i g U ti l it y             v 6 . 0 8 . 0 5 . 0 0  (2 0 0 6 . 0 8 . 0 2 )
Adapter Properties -- SAS1068
Adapter SAS1068
PCI Slot 00
 PCIAddress(Bus/Dev/Func)05.03.00
 MPTFirmwareRevision1.15.00.00-IR
 SASAddress500E0180:60831008
 NVIDIAVersion25.02
Status Disabled
Boot Order 0
Boot Support (Enabled OS only)
RAID Properties
SAS Topology
Advanced Adapter Properties