Asus P5M2 - Page 153

5-42
Chapter 5: RAID configuration
2. On the next screen that appears, select View Existing Array.
3. The
View Array screen appears. Here you can view properties of the RAID
array(s) created. If you have congured a hot spare, it will also be listed. If
you created more than one array, you may view the next array by pressing
<Alt+N>.
Esc=ExitMenuF1/Shift+1=Help
Enter = Choose array type to create
LSILogicCongUtilityv6.08.05.00(2006.08.02)
Select New Array Type -- SAS1068
ViewExistingArrayViewtheexistingconguration.
Create IM Volume Create Integrated Mirror Array of 2
 disksplusanoptionalhotspare.Data
ontheprimarydiskmaybemigrated.
Create IME Volume Create Integrated Mirrored Enhanced
 Arrayof3to8disksincludingan
optional hot spare.
ALL Data onarraydiskswillbedeleted!
Create IS Volume Create Integrated Striping array of
 2to8disks.
ALL Data onarraydiskswillbedeleted!
Esc=ExitMenuF1/Shift+1=Help
Enter=SelectItemAlt+N=NextArrayC=Createanarray
LSILogicCongUtilityv6.08.05.00(2006.08.02)
View Array -- SAS1068
Array Type 1 of 1
Identier  LSILOGICLogicalVolume3000
Type IME
Scan Order 0
Size(MB)  51498
Status Optimal
Manage Array
SlotDeviceIdentierRAIDHotDrivePredSize
Num   DiskSprStatusFail(MB)
0SEAGATEST373454SS0003YesNOOkNo34331
2SEAGATEST373454SS0003YesNOOkNo34331
3SEAGATEST373454SS0003YesNOOkNo34331