Note:
Safety signs are designed and fitted to the product to warn of possible dangers,
and MUST be replaced immediately if they become unreadable or lost. If the
product is repaired and parts have been replaced on which safety signs were
fixed, be sure new safety signs are fitted before the product is put into service.
Key (continued)
12. Burn/Scald hazard (engine compartment)
13. Emergency Exit (rear window, front door / if equipped).
14. Explosion / burn hazard (read operator’s manual)
15. Skin (oil) injection hazard
16. Crush hazard (lift arm brace)
17. Crush Hazard (Lift arms)
18. Crush hazard (run over)
19. Clean undercarriages notice
20. Explosion / burn hazard (read operator’s manual) (engine compartment)
21. Burn hazard (engine compartment)
22. Entanglement hazard (engine compartment)
13
2 SAFETY
RT-40 US O&M
0404-766 2019-05