To Next Page

To Previous Page

7 MAINTENANCE

7.16 Air Cleaner Removal / Replacement

A properly functioning air cleaner is

necessary to ensure performance and

to prolong engine life. The air cleaner is

electronically monitored. If the air filter

requires service, a fault message will

be displayed on the operator interface

(fig. 7.16-4, 7.16-5) indicating the need

for service.

To service the air cleaner:

1. Shut the machine down as described in section 5.12, then open the hood to

access the air cleaner housing.

2. Open the latches (1) on the air cleaner housing to release the cover, pull to

remove.

3. Immediately vacuum the inside of the housing to remove loose dirt.

4. Once any dirt particles have been removed, slowly remove the primary

element (2) taking care not to disturb dirt that may be caked around the

filter seal.

5. Again vacuum the canister.

6. Carefully remove the secondary element (3) at this time.

7. Wipe the seal areas with a clean damp cloth to remove any remaining dirt.

8. Reverse steps 1, 2, 4 and 6 to reinstall new elements prior to resuming

operation.

RT-40 US O&M

0404-766 2019-05

7.16-1 7.16-2

7.16-3

Questions and Answers:

Need help?

Do you have a question about the ASV RT-40 and is the answer not in the manual?

ASV RT-40 Specifications

General