1 INTRODUCTION
3
After installation of compatible (see section 4.10) special working attachments,
the equipment can be used for corresponding applications.
The operator must follow the operating instructions (manuals) for any externally
supplied components or attachments.
Any use varying from that described here or any lack of adherence to the operat-
ing instructions, maintenance procedures, or replacement intervals described in
this manual shall be regarded as unintended or improper use. The supplier cannot
be held responsible for any damage resulting from improper use. This risk is
borne solely by the user.
1.5 Bulletin Compliance
It is very important to comply with all safety related bulletins. Bulletins are tied to
the most current owner on record. Therefore, it is important that any new owner
contact their local dealer to register the machine in their name. This will ensure
that they will be notified in the event of a safety related bulletin affecting their
machine.
1.6 Contacting the Manufacturer
If you have questions relating to ownership including, but not limited to: accident
reporting, current owner updates, product applications and safety, standards and
regulations compliance, product modifications, transfer of ownership, please
consult your local dealer as the first point of contact.
1.7 Copyright
This manual is intended for use by personnel responsible for operation, mainte-
nance, repair, and supervision activities involving the machine described within.
This manual is copyrighted. It shall not, either in whole or in part, be reproduced,
transmitted, or used for the purpose of competition without our prior written con-
sent.
1.8 Warranty
Your RT-40 is warranted under the Standard Limited New Product Warranty
(“Warranty”). A copy of the Warranty certificate is available from your Authorized
RT-40 Distributor.
RT-40 US O&M
0404-766 2019-05
To Next Page
Loading...
Need help?
General
