41
One-touch setup and operation
To modify a one-touch number
continued from previous page
4. Press the desired one-touch key to store the
telephone number in a location.
-OR-
Press [LOWER], then the desired one-touch
key to store the telephone number in the lower
location.
5. Press [ ] or [ ] to select CANCEL. Press [ENTER]
to exit the VIEW feature. To move to the next
feature, press [ ].
-OR-
Press and hold [ENTER] to exit.
NOTE: If the desired one-touch key location
was empty, the screen will display SAVED! If there
is a telephone number in it, the screen will display
REPLACE SPD#XX? (XX is the desired one-touch
location number.) You can replace the current
entry by pressing [ENTER], or keep the current
entry by pressing [ ] or [ ] until you see NO
REPLACE? Press [ENTER], then choose another
one-touch key location.
To Next Page
Loading...
Need help?
General
