1
Getting started
Introduction
This AT&T Small Business System is expandable to a 16-extension telephone
system. The 1070 telephone is compatible with 1040 and 1080 telephones.
For details, see the Installation Guide. This system is not compatible with any
other AT&T 4-line small business telephones, except for the 1040 and 1080
telephones.
The 1070 telephone is hearing-aid compatible and can be connected to up
to four incoming telephone lines. This telephone features a speakerphone
for handsfree use and a headset jack compatible with most two-band 2.5mm
headsets (sold separately). There are two additional ports, known as AUX
jacks or data ports, available for connecting the telephone to another device
such as a fax machine or modem.
The 1070 allows paging, intercom and call transfers between system telephones
and is capable of connecting three parties in the same conference call.
This telephone also features a 32-number one- and two-touch memory
for faster dialing and has a directory which can store up to 200 additional
numbers with names.
This telephone has a caller ID feature which supports caller ID with call
waiting service. (Caller ID services are subscriber services available from many
local telephone companies for a fee.)
If there is a 1080 telephone in your system that is an auto attendant, it may
record messages for your set.
The 1070 telephone is compatible with Centrex service. Centrex is a special
subscriber service which may be available from your local telephone company
for a fee. If you subscribe to Centrex service, refer to the Centrex operation
section (page 66).
This user's manual contains detailed instructions for using your AT&T Small
Business System 1070 telephone. Please read this manual before using this
1070 telephone.
To Next Page
Loading...
Need help?
General
