AT&T CLP99283 - Answer On;Off

Answering system
Answering system settings
Answer on/off
Unless you change it, the answering system is on and ready to
record messages. You can turn the answering system off, but
if you do so, the answering system does not answer calls and
record incoming messages.
To turn the answering system on or off:
Using a cordless handset:
1. When the handset is in idle mode, press MENU to enter the
main menu.
2. Press qCID or pDIR to scroll to Answering sys, then
press SELECT.
3. Press qCID or pDIR to scroll to Answer On/Off, then
press SELECT.
4. Press qCID or pDIR to highlight On or Off, then
press SELECT to save the setting. You hear a
confirmation tone.
When the answering system is on, the handset shows
ANS ON.
Using the telephone base:
Press /ANS ON/OFF to turn the answering system on
or off. If the answering system is turned on, it announces,
“Calls will be answered.” If the answering system is
turned off, it announces, “Calls will not be answered.”
-OR-
1. When the telephone base is in idle mode, press MENU
to enter the main menu.
2. Press SELECT to select Answering sys.
3. Press qCALLER ID or pDIRECTORY to scroll to
Answer ON/OFF, then press SELECT.
4. Press qCALLER ID or pDIRECTORY to highlight On or
Off, then press SELECT to save the setting. You hear a
confirmation tone.
105
Answering sys
Directory
Caller ID log
Intercom
p
q
SELECT
BACK
ANSWERING SYS
Delete all old
Record memo
Answer ON/OFF
p
q
SELECT
BACK
ANSWER ON/OFF
On
Off
p
q
SELECT
BACK
SELECT
Play messages
Answering sys
Directory
Caller ID log
BACK
SELECT
ANSWERING SYS
Delete all old
Record memo
Answer ON/OFF
BACK
SELECT
ANSWER ON/OFF
On
Off
BACK