Multiple handset use
Call transfer using intercom
Use the intercom feature to transfer an outside call to another system
handset or the telephone base. You can also share an outside call with
another system handset or the telephone base.
To transfer or share an outside call using intercom:
Using a cordless handset:
1. During the call, press OPTION.
2. Press SELECT to choose Intercom.
If you have one handset, the handset shows Calling base.
If you have more than one handset, the handset shows
INTERCOM TO: Use the dialing keys to eenter a specific
device number (0 for the telephone base, 1-9 for
handsets 1-9, TONE followed by 0-2 for handsets 10-12,
or TONE followed by
#
for all devices), or press qCID or
pDIR to scroll to the desired device and press SELECT.
The call is automatically put on hold. Your handset screenYour handset screen
shows Calling HANDSET X, Calling BASE 0 or Calling all.
The destination device rings and displays HANDSET X is
calling, or HANDSET X is calling all.
3. To answer the intercom call on the other device, press HOME/FLASH,
/SPEA�ERSPEA�ER, CELL 1, CELL 2 or any dialing key (0-9, TONE ) on the
destination handset, or press HOME on the telephone base.
4. From this intercom call, you have the following options:
You can transfer the call. Press OPTION and then press SELECT to
select Transfer on the calling handset. Your screen shows
Call transferred. The other device automatically connects to the
outside call.
You can let the other device join you on the outside call in a three-way
conversation. Press OPTION. Press qCID or pDIR to highlight Share
call, then press SELECT.
You can end the intercom call and continue the outside call with your
handset. Press OFF/CANCEL, END, HOME/FLASH, CELL 1 or
CELL 2 on your handset (the ended intercom call party hears four
beeps).
NOTES:
If you want to cancel an intercom call and reconnect to the outside call before the destination
handset answers, press OFF/CANCELCANCEL on the originating handset..
If the called device is not answered within 100 seconds, or accessing the directory or caller ID
log, or is on a call, or is out of range, the initiating device shows No answer. Try again.
•
•
•
•
•
•
•
SELECT
Transfer
Intercom
B
Directory
Caller ID log
BACK
BACK
SELECT
INTERCOM TO:
BASE 0
HANDSET 2
All
CK
S
71
To Next Page
Loading...
