AT&T CLP99283 User Manual

Getting started
15
Installation options
Wall mount to tabletop installation
1. If the telephone line cord and power adapter cord are bundled, untie
them first. Push the telephone base up to remove it from the wall. Unplug
the telephone line cord (or DSL filter) from the wall jack. Unplug the power
adapter from the power outlet.
2. Swivel the wall mount bracket up to tabletop position and then push it into
the telephone base until it clicks into place.
3. Plug the telephone line cord (or DSL filter) into the wall jack. Plug the
power adapter into a power outlet not controlled by a wall switch. Bundle
the telephone line cord and power adapter cord neatly with twist ties
if necessary.
1
2
3

AT&T CLP99283 Specifications

General

Brand	AT&T
Model	CLP99283
Category	Cordless Telephone
Language	English