AT&T CLP99283 User Manual

Bluetooth
32
Bluetooth setup
Change PIN
You are required to enter a PIN when establishing a Bluetooth connection.
The default PIN of your telephone base is 0000.
To change the PIN:
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press CALLER ID or DIRECTORY to highlight Bluetooth,
then press SELECT .
3. Press CALLER ID or DIRECTORY to highlight Change
PIN, then press SELECT . The telephone base displays
ENTER NEW PIN and the existing PIN.
4. Use the dialing keys to enter a new 4-digit code.
Press X/DELETE to erase a digit.
Press and hold X/DELETE to erase all digits.
Press CALLER ID or DIRECTORY to move the cursor to the left or right.
5. Press SET to save.
Cell ringer
If this feature is on and you have connected an iPhone (iOS 4.1 or later) to
your telephone system, the telephone plays your iPhone ringtone when there
is incoming call.
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press CALLER ID or DIRECTORY to highlight Bluetooth,
then press SELECT.
3. Press CALLER ID or DIRECTORY to highlight
Cell ringer, then press SELECT.
If there are more than one paired device on the
device list, press CALLER ID or DIRECTORY to
highlight the desired device, then press SELECT.
4. Press CALLER ID or DIRECTORY to choose On or Off, then press SET.
NOTE: The quality of ringtone played on your telephone is subject to individual ringtone
characteristics.
•
•
•
•
BLUETOOTH
Device list
Download dir
Change PIN
BACK SELECT
ENTER NEW PIN
0000
BACK SET
BLUETOOTH
Download dir
Change PIN
Cell ringer
BACK SELECT
CELL RINGER
On
Offf
BACK SET

AT&T CLP99283 Specifications

General

Brand	AT&T
Model	CLP99283
Category	Cordless Telephone
Language	English