Bluetooth
Introducing Bluetooth
Your new AT&T CLP99183/CLP99283/CLP99353/CLP99383/CLP99453/
CLP99483/CLP99553/CLP99583 telephone system with Bluetooth wireless
technology has the following features:
Pair up to 4 Bluetooth enabled devices (cell phones or headsets) with the
telephone base.
Connect a maximum of 2 Bluetooth enabled devices to make and receive
cell calls. Both devices can be active on a call at a time.
Connect a Bluetooth enabled headset for making and receiving home calls.
Conference any combination of cell and home call.
Make and receive calls using your cell phone service with your telephone
base or system handsets.
Download phonebook entries from your cell phone.
Ringtone share feature allows you to set your telephone to play your
IPhone® (iOS 4.1 or later) ringtone.
IMPORTANT INFORMATION
After plugging in the telephone base, wait at least 20 seconds before
connecting a Bluetooth device. The screen shows Bluetooth system busy
if you try to connect too soon.
Refer to the user's manual of your Bluetooth enabled cell phone or headset
for more information about how that device uses Bluetooth connectivity.
Bluetooth wireless technology operates within a short range (up to 30
feet) from the telephone base. Keep connected cell phones and headsets
within this range.
If your cell phone has poor reception in your home, the CLP99183/
CLP99283/CLP99353/CLP99383/CLP99453/CLP99483/CLP99553/
CLP99583 cannot improve the reception. However, if there is a location
in your house with better reception, you can leave your cell phone at
that location while you use the CLP99183/CLP99283/CLP99353/
CLP99383/CLP99453/CLP99483/CLP99553/CLP99583 cell line.
For optimal performance, the cell phone must be within 15 feet of the
telephone base.
iPhone® is a registered trademark of Apple. Inc.
•
•
•
•
•
•
•
•
•
•
•
16
To Next Page
Loading...
Need help?
General
