Features
When you turn on the Do Not Disturb feature, your phone can
automatically post the message
DO Not Disturb. This
message appears on the display of an inside caller with a
display phone when he or she calls you. When you turn off
the feature, the message is canceled.
NOTE:
For the Do Not Disturb feature to post the
Do Not Disturb message, you must also program a
Posted Message button on your phone, as described
later in this section.
You can also post and cancel the D
O Not Disturb
message with a Posted Message button. However, posting
or canceling the message does not turn the feature on or off.
The Do Not Disturb feature controls the message; the
message does not control the feature.
To Program a Do Not Disturb Button
1. Label the button to be programmed as
Do Not Disturb.
2. Press Feature and dial 00.
3. Press the button you labeled Do Not Disturb.
4. Dial ✱ 47.
5. Press Feature and dial ✱ 00.
5-28 Do Not Disturb
To Next Page
Loading...
Need help?
General
