MicroCell
™
Informational Document for
Technical, Operational, and Troubleshooting Issues v1.7
by Otto Pylot
Page 22 of 23
Connect the MicroCell directly to your router or router/gateway combo with an
ethernet cable. If you are using PowerLine Adapters, bypass them if possible and see
if that improves your connection
Disclaimer:
This has been a very long project and is still a work in progress. I have tried to make
this as accurate as possible. As more accurate information, corrections, or fixes
become available, I will update the document. You can PM me for any corrections or
future additions to this “living” document.
I am not an AT&T employee. However, this document would not have been possible
without the considerable help and guidance from the AT&T Admins and the
MicroCell Forum members. I would also like to extend a special thanks to Avedis53
for his help and support.
Otto Pylot
August 2013
Additions/Changes:
Version 1.7, October 2014
1. Added the new DPH-154 graphic
2. Briefly discussed the DPH-154 in the introduction
3. Listed the power adapter specs for the DPH-154
4. Listed common error codes (under Miscellaneous)
5. Listed MicroCell alternatives (under Miscellaneous)
Version 1.6, June 2014
1. Added the voip and speed test links (under VoIP basics)
2. Added the comment about multiple MicroCells at one location (under
Requirements)
3. Change the wording of priority setup to alternate setup
4. Added page numbers to the Title of Contents page
Version 1.5, March 2014
1. Added a TOC with the MicroCell graphic
2. Added Wireless Home Phone as it relates to the MicroCell
3. Slight changes to the U-verse section
4. Added Vonage section
5. Added a comment about wireless broadband
6. Added a comment to the Miscellaneous section about competing services
To Next Page
Loading...
Need help?
General
