AT&T ML17929 - Set Date and Time; Set the Primary Line

14
Menu setup
Telephone settings
Set date and time
If you subscribe to a caller ID service provided by your telephone service
provider, the date, month and time are set automatically with each
incoming call.
When the telephone is idle, press MENU/ENTER.
Press or to scroll to PHONE SETTINGS.
Press MENU/ENTER.
Press MENU/ENTER to select SET DATE/TIME.
Use the dialing keys to enter the correct date and
time. To enter a number that is less than 10, enter a
0 before the digit. Press CID/ or /DIR to move the
cursor to the left or right.
-OR-
Press or to scroll to the desired digit. Press
CID/ or /DIR to move the cursor to the left or right.
Press or to scroll to AM or PM.
Press MENU/ENTER to save. The telephone plays a confirmation tone and
returns to the previous menu.
NOTE: The telephone plays an error tone if you enter an invalid date or time.
Set the primary line
Use this feature to select the default telephone line to be used when you
make calls. The primary line is set to LINE1 by default.
When the telephone is idle, press MENU/ENTER.
Press or to scroll to PHONE SETTINGS.
Press MENU/ENTER.
Press or to scroll to PRIMARY LINE.
Press MENU/ENTER.
Press or to scroll to LINE1 or LINE2.
Press MENU/ENTER to save. The telephone plays a
confirmation tone and returns to the previous menu.nu.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
SET DATE/TIME
01/01 12:01 AM
MM/DD HH/MM
SET DATE/TIME
__/__ __:__ AM
MM/DD HH/MM
PHONE SETTINGS
SET DATE/TIME
PRIMARY LINE
PREFERRED MODE
SET DATE/TIME
01/01 12:01 AM
MM/DD HH/MM
SET DATE/TIME
__/__ __:__ AM
MM/DD HH/MM
PHONE SETTINGS
SET DATE/TIME
PRIMARY LINE
PREFERRED MODE
PHONE SETTINGS
SET DATE/TIME
PRIMARY LINE
PREFERRED MODE
PRIMARY LINE
LINE1
LINE2
PHONE SETTINGS
SET DATE/TIME
PRIMARY LINE
PREFERRED MODE
PRIMARY LINE
LINE1
LINE2