24
Telephone operation
Options while on calls
Switching between lines
Use this feature to switch between lines during a call.
While on a call, press the LINE button of the line not in use to establish
a new call or answer an incoming call on that line. The original line is
automatically put on hold.
To return to the first call, press the original LINE button. The other line is
automatically put on hold.
Conference calls
Use this feature to set up a three-party call by using two lines at the same time.
To make a three-way conference call:
Make or answer a call.
Press the other LINE button to establish a new call or answer an incoming
call and put the original line on hold.
Press CONF to begin a three-party conference call. The screen displays
LINE 1 & LINE 2 IN CONFERENCE.
If the caller on line 2 hangs up during the conference call, the call continues
on line 1. However, if the caller on line 1 hangs up, a tone plays. Press the
LINE 2 button to stop the tone and continue the call with line 2.
To place a conference call on hold:
While on a conference call, press HOLD to hold both lines.
Press CONF to release hold and continue the conference call.
To talk privately with one caller:
Press HOLD to hold both lines. Press the desired LINE button for the caller
you want to speak with.
Press CONF to continue the conference call.
To drop one line:
Press the LINE button for the caller you want to speak with. The other call is
disconnected automatically.
To end a conference call:
Place the handset on the telephone base to hang up, or press SPEAKER
or HEADSET.
1.
2.
1.
2.
3.
1.
2.
1.
2.
•
•
To Next Page
Loading...
Need help?
General
