EasyManuals Logo

AT&T ML17929 User Manual

AT&T ML17929
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
44
Appendix
Troubleshooting
If you have difficulty with your telephone, please try the suggestions below.
For customer service, visit our website at www.telephones.att.com or
call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
My telephone does not work at all.
Make sure the power adapter is securely plugged into an electrical outlet
not controlled by a wall switch.
Make sure you plug the telephone line cord securely and firmly into the
telephone jack and the telephone wall jack.
Unplug the power adapter from the electrical outlet. Wait for
approximately 15 seconds, then plug it back in. Allow up to one minute for
the telephone to reset.
Disconnect the telephone base from the telephone wall jack and plug in a
working telephone. If that telephone does not work, the problem is probably
in the wiring or the telephone service. Call your telephone service provider.
I cannot get a dial tone.
First, try all suggestions above.
Make sure you plug the handset cord securely and firmly into the handset
jack on the telephone base and the corded handset.
Your telephone line cord might be malfunctioning. Try installing a new
telephone line cord.
Make sure HOLD is not pressed.
If there is no dial tone when the HEADSET key is pressed, make sure a
corded headset is firmly connected into the headset jack.
If you are only using one telephone line, make sure to set it as the primary
line (see Set the primary line on page 14).
If the previous suggestions do not work, disconnect the telephone base
from the telephone jack and connect to a different telephone. If there
is no dial tone on that telephone either, the problem is in your wiring or
telephone service. Contact your telephone service provider.
I cannot dial out.
First try all the suggestions above.
Make sure there is a dial tone before dialing. The telephone might take a
second or two to produce a dial tone. This is normal. Wait an extra second
before dialing.
Check that all the telephones connected to the same telephone line are
hung up.

Table of Contents

Other manuals for AT&T ML17929

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AT&T ML17929 and is the answer not in the manual?

AT&T ML17929 Specifications

General IconGeneral
Model NumberML17929
Lines Supported1
Answering SystemDigital
Caller IDYes
SpeakerphoneYes
DisplayLCD
Call WaitingYes
Speed DialYes
Handset LocatorYes
IntercomYes
RedialYes
Volume ControlYes
Power SourceAC Adapter
BatteryRechargeable
Phonebook Capacity50 names/numbers

Related product manuals