AT&T Small Business System Speakerphone - Audible Signals

Table/Desk Installation
For best results, follow the directions in “Battery Installation” on page 11
before installing the phone.
1 Connect the telephone line cords to the telephone and wall
jacks as shown in the appropriate illustration below. Use
only the line cords that came with this phone.
• Four One-Line Jacks (To use this installation option, you’ll
need to purchase two two-line adapters. Adapters are available
at retail stores or by calling 1 800 222–3111.)
• Two Two-Line Jacks
continued on page 14
13
INSTALLATION
INSTALLATION
Two-line adapters
Telephone
line cords
Modular telephone
jacks Lines 3 and 4
Modular
telephone jacks
Lines 1 and 2
L1/L2 jack
L3/L4 jack
Modular
telephone jack
Lines 3 and 4
Modular telephone
jack Lines 1 and 2
Telephone
line cords
L1/L2 jack
L3/L4 jack
974_CIB_1ATT_FINAL 4/9/2004 3:32 PM Page 13