AT&T Small Business System Speakerphone - FEATURE SETUP (continued); Turn the Ringer On or Off for Each Line; Select the Ringer Type

Set Delay Ring
Set the length of time before incoming calls will ring at
this extension.
¥
NOTE: If you choose to set a delayed ring on a phone
with Voice Mail service, the phone may not ring at all
before Voice Mail picks up the call.
1 Press E to begin feature setup.
2 Press - until the screen display includes PHONE
SETTINGS.
3 Press E. The screen display includes
EXTENSION NO.
4 Press - until the screen display includes DELAY
RING and the current setting.
5 Press < or > to change the delay ring setting
(Off, 2 sec…30 sec).
6 When the correct delay setting is shown, press
- to save your choice. The screen display
includes Auto-Mute.
7 Proceed to Step 5 on page 28 to set the next
feature (Auto-Mute)
— OR —
Press and hold E to return to the idle
screen.
¥
NOTE: You can exit feature setup and return to the
idle screen any time. Simply press and hold E.
27
FEATURE SETUP
FEATURE SETUP
i
ii
ii
k
k
k
o
o
o
j
j
j
974_CIB_1ATT_FINAL 4/9/2004 3:32 PM Page 27