AT&T Small Business System Speakerphone - FEATURE SETUP (continued); Set This Phone to be the Centrex Console Phone

Reset COVM Indicator
If a COVM indicator remains on when there are no
messages on that line, you may have received a false signal
from your local telephone service provider. You can clear
the indicator manually.
1 Press E to begin feature setup.
2 Press - until the screen display includes
SPECIAL OPTIONS.
3 Press E. The screen display includes LINE
USAGE.
4 Press - until the screen display includes COVM
RESET.
5 Press E. The screen display includes
L1 COVM RESET.
6 Press + or - to scroll through the COVM
Reset menu (L1 COVM RESET...L4 COVM
RESET, or ALL COVM RESET).
7 When the line you want to reset is displayed,
press E to remove the message waiting
indicator. You can clear all the lines at once by
choosing ALL COVM RESET. The screen display
includes Reset!.
8 Press - until the screen display includes DONE.
9 Press E. The screen display includes
COVM RESET.
10 Press - until the screen display includes
AREA CODES, then proceed to Step 5 on
page 38 to program the Home or Local Area
Codes.
— OR —
Press and hold E to return to the idle screen.
¥
NOTE: You can exit feature setup and return to the
idle screen any time. Simply press and hold E.
37
FEATURE SETUP
FEATURE SETUP
i
ii
ii
m
m
m
j
j
j
974_CIB_1ATT_FINAL 4/9/2004 3:32 PM Page 37