Advanced Features Setup
B. Power Control Options
By factory default, the POWER key only operates the AT&T U-verse Receiver. Once you have
programmed the TV mode key, both the TV and the AT&T U-verse Receiver will be powered
ON and OFF at the same time. In normal operation, you can turn programmed devices ON or OFF
individually by pressing the appropriate mode key, and then the POWER key.
B1. To Power Multiple Devices On and Off Simultaneously
STEP 1. Press and hold both the AT&T and OK keys for one second, then release.
All the mode keys flash twice.
STEP 2. Enter 9 7 7 using the numeric keypad. The AT&T key flashes twice.
STEP 3. Press the AT&T key. The AT&T key will flash twice indicating correct entry.
STEP 4. Press the appropriate mode key or keys ( or or ) that you wish to also
control. The appropriate mode key will flash twice.
NOTE: The mode key must first have been programmed for your device.
STEP 5. Press the ENTER key to complete the programming. The last mode key
programmed will give a long flash with a long beep indicating successful
programming.
To Next Page
Loading...
